What This Guide Covers
Adding a chase light bar to your UTV roll cage improves visibility and safety, especially when riding in groups or on trails at night. This guide walks through installing an LED chase light bar on a 1.5-inch round roll cage, with wiring tips for turn signal and brake light integration. The focus is on the 30" LED Chase Light Bar that fits Polaris RZR and Can-Am Maverick X3 models.
Before starting, confirm your roll cage tube diameter. This light bar is designed for 1.5-inch original round tubes. If your cage uses a different size or shape, the included clamps may not fit securely.
What the Chase Light Bar Includes
- 30" LED Chase Light Bar fit 1.5” Roll Cage for Polaris RZR, Can-Am Maverick X3: The light bar is suitable for the 1.5 inch original round tube, has strong impact resistance, and is sturdy and durable. The tube clamps are equipped with rubber pads, which not only play a role in anti-slip but also do not wear the original vehicle paint. The rubber pads protect your roll cage finish while keeping the bar firmly in place. No need to worry about scratches or slipping during rough rides.
30" LED Chase Light Bar fit 1.5” Roll Cage for Polaris RZR, Can-Am Maverick X3 - 30" LED Chase Light Bar fit 1.5” Roll Cage for Polaris RZR, Can-Am Maverick X3: EVA heat shrink tube seal and high toughness silicone to protect the wick, waterproof level IP67, can prevent sand, dust, dirt, and rain from harming the signal light. IP67 waterproofing means the light bar can handle mud, rain, and trail dust without failing. It is built for outdoor UTV use.
- 30" LED Chase Light Bar fit 1.5” Roll Cage for Polaris RZR, Can-Am Maverick X3: The chase light has a 360-degree luminous angle, 6-speed adjustment, and 10 brightness adjustments. Multiple brightness and speed settings let you customize the light pattern for different conditions—from a steady brake light to attention-grabbing chase modes.
- 30" LED Chase Light Bar fit 1.5” Roll Cage for Polaris RZR, Can-Am Maverick X3: There are two control methods - APP control and remote control, you can choose the control method you like, it is convenient to use. You can adjust settings from your phone or a handheld remote, which is handy if the bar is mounted out of easy reach on the rear cage.
Installation Steps
The following steps are based on the supplied instructions and typical UTV roll cage mounting. Work on a flat surface and disconnect the battery before wiring.
- 1. Mount the light bar on the roll cage: Position the light bar on a 1.5-inch round tube—rear cage bars work well for chase and brake functions. Tighten the tube clamps evenly. The rubber pads will grip the tube without scratching paint.
- 2. Route the wiring harness: Run the harness along the cage, using zip ties to secure it away from moving parts or heat sources. Leave enough slack at the light bar for adjustment.
- 3. Connect to turn signal and brake light (rear installation): When installed at the rear, connect the positive wire to the positive pole of the original vehicle turn signal and brake light. This gives you turn and brake signal indication. The supplied information does not detail a separate ground wire; follow your vehicle's wiring diagram for a proper ground connection.
- 4. Test the functions: Reconnect the battery and test turn signals, brake light, and chase patterns. Use the remote or app to cycle through the 6 speeds and 10 brightness levels. Confirm everything works before securing all wiring.
Wiring and Control Notes
The 30" LED Chase Light Bar uses high-quality 5050 SMD LEDs, which have passed durability tests. The supplied information confirms that the light bar can be controlled via a remote or an app, giving you flexibility in how you adjust settings on the trail.
If you plan to use the chase light bar only as a rear light, the supplied instructions specify connecting to the turn signal and brake light positive wires. For front mounting or other uses, consult your vehicle's wiring diagram to identify the correct power source. The supplied information does not include a detailed wiring diagram for every model, so a multimeter or test light can help verify connections.
Fitment and Compatibility
This light bar is designed for 1.5-inch roll cages commonly found on Polaris RZR and Can-Am Maverick X3 models. The tube clamps include rubber pads for a secure, scratch-free fit. If your UTV uses a different tube diameter, the clamps may not fit. The supplied information does not list other UTV brands or custom cage sizes, so measure your roll cage before purchasing.
The IP67 waterproof rating protects against dust and water immersion, making it suitable for off-road conditions. However, the supplied information does not specify operating temperature range or UV resistance—consider those factors if you ride in extreme heat or direct sunlight for long periods.
What the Supplied Information Does Not Confirm
The product record does not include a detailed wiring diagram, specific fuse rating, or instructions for mounting on non-1.5-inch tubes. It also does not confirm compatibility with specific turn signal flasher modules or whether an additional relay is needed. If your UTV uses a CAN-bus system, you may need a load resistor to prevent hyper-flash. Always verify with your vehicle's service manual or a trusted mechanic.
The supplied information does not mention a mounting bracket for flat surfaces or alternative tube sizes. For custom cages, you may need to purchase additional clamps or adapters.
