Magnetic Sun Visor for UTV: Pro-Fit Bar vs Metal Roof Fit Guide
By Kemimoto Official: Aftermarket UTV Accessories & Parts | Published: 2026-11-01
Category: Buying Guides
Learn how to choose a UTV magnetic sun visor for a Pro-Fit bar or metal roof, plus when a 1pc visor beats a 2pc setup for glare control.
Quick answer
Choose a magnetic visor that mounts to a flat steel surface you actually have: a metal roof panel or a compatible Pro-Fit crossbar. If you need coverage for both driver and passenger, plan for two 1pc visors rather than assuming a single unit spans the cab.
Why the mounting surface decides the visor
A magnetic visor only works where the magnet can grip steel. Aluminum roof panels, plastic roofs, and fabric tops won't hold it, so confirm the material before shopping. Pro-Fit bars vary by machine and model year, so measure the bar diameter and check for a flat, ferrous section rather than assuming every crossbar is magnetic.
1pc vs 2pc: coverage versus simplicity
A single visor is easier to position and stow, but it usually covers one seating position. Two visors give independent adjustment for driver and passenger, at the cost of more pieces to remove and store. Decide based on who actually gets glare in your cab, not on the maximum possible coverage.
When a magnetic visor is the wrong tool
If your roof is aluminum or plastic and your cage has no steel crossbar, a magnetic visor has nothing to attach to. In that case, look for a clamp-on or bolt-on visor instead of forcing a magnetic mount. Also skip magnetic mounting if you regularly remove and refit the visor in muddy or dusty conditions where grit can collect between magnet and paint.
Decision rules for your UTV
- Check the roof material first: If the roof is steel, a metal roof visor is a direct fit. If it is aluminum, plastic, or canvas, the magnet will not hold — choose a clamp-on or bolt-on visor instead. Test with a magnet on the actual roof panel before ordering.
- Measure the Pro-Fit bar: For a Pro-Fit bar sun visor, confirm the bar is steel and measure its diameter and flat section. A bar that is too curved or too small gives the magnet little contact area. A bar that passes the magnet test but has a narrow flat spot may still slip.
- Choose 1pc or 2pc by seating: Buy one 1pc visor for a single glare source, or two 1pc visors when both driver and passenger need independent adjustment. Do not expect one 1pc unit to cover both seats. Count the seats that actually face the sun before choosing quantity.
- Plan storage and adjustment: Magnetic visors are removed and repositioned often. Decide where you will stow it when not in use, and check that the magnet area stays clean so it does not scratch painted metal. A microfiber cloth and a dedicated storage spot prevent most magnet-mount complaints.
Product facts
- Universal Magnetic Sun Visor for UTV with Pro-Fit Bar or Metal Roof(1PC): Uses a strong magnetic mounting system for tool-free installation on metal roofs and crossbars. You can reposition or remove it without drilling, but only if your roof or bar is ferrous metal.
Universal Magnetic Sun Visor for UTV with Pro-Fit Bar or Metal Roof(1PC)
Who this visor suits
Best for
- Owners with a steel metal roof or a steel Pro-Fit crossbar who want tool-free glare control
- Riders who want to move or remove the visor between summer sun and winter snow glare
Not for
- UTVs with aluminum, plastic, or fabric roofs and no steel crossbar
- Owners who need a permanent, drill-mounted visor that never moves
