Back to Blog
How-to Guides 2026-11-05 Kemimoto Official: Aftermarket UTV Accessories & Parts 7 views

How to Install a Front Camera on Polaris RZR PRO XP

How to Install a Front Camera on Polaris RZR PRO XP

A practical walkthrough for mounting a front camera on your Polaris RZR PRO XP, including the drill point, wiring connection, and the alignment detail that keeps your view level.

What this install actually involves

Adding a front camera to a Polaris RZR PRO XP is a short job when you use a camera designed to replace the factory terminal. The Kemimoto Front Camera For Polaris RZR PRO XP XP 4 Turbo 1000 900 PRO R is one such option: it mounts through the front plastic plate, links to the original replacement terminal, and locks in with a rotating buckle. No separate monitor or custom wiring harness is described in the supplied information.

The steps below cover the physical mounting and connection. Before you start, confirm your machine is listed in the fitment notes at the end of this guide, because the same camera body is sold for several RZR year ranges.

Front camera installation, step by step

Work on a cool, shaded surface so the plastic panel is not hot or brittle. Have the camera, its replacement terminal, and a drill with the correct bit for the front plastic plate ready.

  1. Choose and mark the drill point: The camera installs through a hole you drill in the front plastic plate. Pick a flat area that gives you the forward view you want, and mark the center before drilling.
  2. Drill the front plastic plate: Drill only the front plastic plate as described in the supplied installation notes. Keep the bit steady so the hole stays round and the camera body seats cleanly.
  3. Seat the camera in the hole: Push the RZR camera into the drilled hole. The housing is made of high-strength aluminum alloy, so it is designed to take a certain amount of impact rather than flex like a plastic shell.
  4. Align the red arrow upward: There is a red arrow on the camera. Make sure it points upward during installation. This is the detail that keeps the horizontal field of view level after you connect the camera.
  5. Link the original replacement terminal: Connect the camera to the original replacement terminal supplied with the kit. The supplied notes describe this as a link to the original terminal rather than a new harness.
  6. Rotate the buckle to lock it: Turn the buckle to complete the installation. Give the camera a gentle tug to confirm it is seated before you button up the front end.

The alignment detail that decides whether the view is usable

The red arrow is not decorative. The supplied installation tips say it must point upward so the horizontal field of vision is normal after connection. If you skip this, the image can sit rotated even though the camera is powered and the wiring is correct.

The supplied information points you to the installation manual for details and suggests watching the video before you install. Use those if the arrow orientation or buckle rotation is unclear on your machine.

What this camera gives you once it is mounted

Fitment: check your model and year before drilling

The supplied fitment list groups this camera by year range. Match your exact model and year before you drill, because the front plastic plate and terminal arrangement differ across RZR generations.

  • 2021–2024 RZR PRO R, 1000 Sport, Turbo S Velocity, Turbo S Lifted Lime LE, S 4 Velocity, S 4 Lifted Lime LE, S, Turbo S 4, Trail, S 1000 Ultimate, PRO XP Sport, XP 4 Sport: Listed as compatible in the supplied fitment notes.
  • 2020–2024 RZR XP Turbo, XP 4 Turbo, XP 4 1000, Premium, High Lifter, RZR 900 Trail, FOX, RZR XP 1000 Premium, High Lifter, Trail S & Rocks, RZR PRO XP, 4 Ultimate, 4 Premium: Listed as compatible in the supplied fitment notes.
  • 2019 RZR XP Turbo S, XP 4 Turbo S, LE, XP 4 Turbo LE, XP 4 Turbo, 4 1000 Ride Command Edition, High Lifter Edition, DYNAMIX Edition, 1000 Trails & Rocks Edition, 4 Turbo S Velocity: Listed as compatible in the supplied fitment notes.
  • 2020 RZR XP Turbo S Velocity, Turbo S, XP 4 Turbo S, 4 Turbo S Velocity, XP 1000 LE, XP 4 1000 LE, XP 1000, RZR PRO XP LE, 4 LE, XP 4: Listed as compatible in the supplied fitment notes.

Before you buy: what the supplied information does not confirm

The supplied record does not state a monitor requirement, a supported video standard, or a separate power specification beyond linking to the original replacement terminal. If your machine has an aftermarket display or a non-standard harness, confirm compatibility with the seller before drilling.

The record also does not give a recommended drill bit size or a torque value for the buckle. Use the installation manual and video referenced in the product information rather than guessing.

Related Articles

Customer Service
Home
Products
Cart
Profile