Confirm your model year before anything else
The hood scoop with mesh is listed for Polaris RZR PRO XP and XP4 2020 through 2024, and for Polaris RZR PRO R, RZR TURBO R and R4 2022 through 2024. If your machine falls outside those year ranges, stop here and verify fitment with Kemimoto before ordering.
This is a hood accessory, so the model-year check is the one step that decides whether the rest of the job applies to you. The supplied catalog does not list trim-specific exceptions, so treat the year and model match as the supported starting point rather than a guess.
Fitment record for the mesh hood scoop
- Hood Scoop with Mesh for Polaris RZR PRO XP/ XP4: Compatible with Polaris RZR PRO XP/ XP4 2020 2021 2022 2023 2024. This is the core fitment line for the two-seat and four-seat PRO XP reader.

Hood Scoop with Mesh for Polaris RZR PRO XP/ XP4 - Hood Scoop with Mesh for Polaris RZR PRO XP/ XP4: Compatible with Polaris RZR PRO R/ RZR TURBO R/ R4 2022 2023 2024. PRO R, Turbo R and R4 owners in those years can use the same scoop.
- Hood Scoop with Mesh for Polaris RZR PRO XP/ XP4: Estimated shipping time: 15-20 days. Plan the install around the delivery window rather than a weekend ride.
Install checkpoints the catalog supports
The supplied record does not include a step-by-step procedure, torque values or fastener list. What it does support is a fit-first sequence: verify the model, inspect what arrives, and test-fit before committing.
- Match the machine to the fitment line: Check your RZR's model and year against the two compatibility statements above. A 2019 PRO XP or a 2021 PRO R is not covered by the supplied fitment.
- Inspect the scoop and mesh on arrival: The product is described as a hood scoop with mesh. Confirm the mesh is present and seated before you begin, since the record does not list replacement mesh as a separate item.
- Test-fit before tightening anything: Set the scoop on the hood and check alignment and clearance before final fastening. The record does not specify hardware or torque, so do not invent a tightening sequence.
- Check hood clearance after fitting: Open and close the hood through its normal range and confirm the scoop does not interfere. The catalog does not state a clearance figure, so this is a visual check, not a measurement spec.
What the mesh does and does not promise
The mesh is part of the product name, so it is reasonable to expect a screened opening rather than an open scoop. The supplied record does not describe mesh material, mesh size or airflow performance, so avoid treating it as a filtration or cooling upgrade with published numbers.
For a UTV hood scoop with mesh, the practical value is the screened look and the debris barrier the mesh provides at the opening. If you need documented airflow or filtration claims, the supplied information does not confirm them.
Where this scoop fits in a PRO XP hood accessory plan
Hood accessories compete for the same real estate, so decide what the scoop is for before adding anything else.
- Appearance-first build: The scoop with mesh is a visual hood change. Pair it with other hood accessories only after confirming they do not overlap the scoop's footprint.
- Debris-conscious trail use: The mesh screens the opening, which suits riders who want a closed look rather than an open intake. The record does not quantify debris protection.
- Performance claims: The supplied record makes no horsepower, cooling or airflow claims. Do not buy it expecting documented gains.
Price, shipping and what to verify before checkout
The catalog lists the scoop at USD 162.79 against a comparison price of USD 219.99, with an estimated shipping time of 15-20 days. Budget the wait into your install plan, especially if you are ordering for a specific ride date.
Before ordering, confirm three things: your model and year appear in the fitment lines, the mesh version is the one you want, and you are comfortable that installation hardware and instructions are not detailed in the supplied record. If any of those is unclear, ask Kemimoto directly rather than assuming.


