Polaris RZR Pro XPへのスペアタイヤマウント取り付け方法

By Kemimoto Official: Aftermarket UTV Accessories & Parts | Published: 2026-10-28

Category: ハウツーガイド

Polaris RZR Pro XPにスペアタイヤマウントを取り付ける方法を数ステップで学びましょう。トレイルでのスペアタイヤをしっかり固定し、後方視界を確保します。

Quick answer

To install a spare tire mount on a Polaris RZR Pro XP, you'll need a compatible carrier, basic hand tools, and about 30 minutes. The key is to align the mounting bracket with the factory frame holes and torque all bolts to spec.

Why a dedicated mount beats a generic option

A carrier built for the RZR Pro XP frame uses the exact bolt pattern and clearance needed. A universal mount often requires drilling or adapters that can weaken the chassis or shift the tire's center of gravity. The Kemimoto spare tire mount for 2020-2024 RZR Pro XP models bolts directly to the factory holes without modification, keeping the installation straightforward and the structure sound.

What about the view and rear storage?

One concern with any rear spare is blocking your rearview mirror or taking up cargo space. The Kemimoto mount positions the tire high and out of your line of sight, so you can still see behind you. It also leaves the rear storage area open for a cooler or gear, which is a practical advantage over low-mounted carriers that eat into bed space.

Installation steps

1. Gather tools and prep the RZR: You'll need a socket set (metric), a torque wrench, and a helper to hold the carrier in place. Park on level ground and remove any cargo from the rear storage area. Check that your RZR is a 2020-2024 Pro XP model – the mount is designed specifically for that frame.
2. Position the mounting bracket: Hold the bracket against the rear frame crossbar, aligning the slots with the factory threaded holes. The bracket should sit flush – if it doesn't, you may have the wrong side facing out. Do not force the bracket. If holes don't align, rotate the bracket 180° before tightening.
3. Install the bolts and torque to spec: Hand-thread all bolts first to avoid cross-threading. Then tighten them in a star pattern using a torque wrench set to the value specified in the included instructions (typically 35-45 ft-lbs). Over-tightening can strip the frame threads. Use a torque wrench, not an impact gun, to finish.
4. Attach the spare tire to the mount: Lift the spare onto the carrier's studs or hub plate. Secure it with the provided lug nuts or bolts. Tighten evenly in a cross pattern. Check that the tire does not contact the bumper or body panels when fully seated – adjust the mount's tilt if your model has that option.
5. Final check and test drive: Shake the tire by hand to confirm it is solid. Drive a short distance on pavement and listen for rattles or rubbing. Re-torque all bolts after 50 miles. A loose mount can cause the tire to shift and damage the carrier or frame. Re-torquing after break-in is essential.

What you need for this install

Spare Tire Mount for Polaris RZR PRO XP 2020-2024: The spare tire carrier is made of heavy metal steel that is corrosion-resistant and not prone to rust or fading. This means the mount can handle trail mud, rain, and UV exposure without degrading, so you won't have to replace it after a few seasons.
Spare Tire Mount for Polaris RZR PRO XP 2020-2024