Kemimoto Official: Aftermarket UTV Accessories & Parts

機車把手末端後照鏡,適用 7/8" 圓形把手

機車把手末端後照鏡,適用 7/8" 圓形把手 - Main image
$35.99 $49.99 In stock

Category: 側視鏡

商品描述

Motorcycle Handlebar Bar End Mirrors for 7/8" Handle Round

重型材質

框架和支架採用精選 CNC 鋁合金製成,球座為不鏽鋼。3.5"x3.5" 鏡面。R1200 鏡面,鏡片提供更寬廣的視野。

注意 1

適用於內徑 13 至 18mm 的把手。或(僅供參考)所有 7/8" 把手,請檢查把手內徑。

注意 2

清晰度極佳,甚至帶有輕微藍色調以減少眩光並保護您的眼睛,後視鏡提供您寬廣的後方視野,後視鏡應安裝在摩托車把手上。

安裝

三種不同厚度的黑色塑膠套管以滿足您的需求。如果您在安裝或其他後視鏡問題上有任何疑問,請隨時聯繫我們。請盡力鎖緊三顆螺絲(即使螺絲超出兩個螺紋),然後後視鏡支架將保持在正確位置,騎行時不會移動,只需將後視鏡調整到最佳角度即可。

包裝

1 組藍色鏡片後視鏡(左右,防眩光)。提示:使用藍色螺紋鎖固劑(如 LOCTITE)以防止產品因震動而鬆脫。

SKU: FCBEM008

適用車型

相容於:

  • FZ07 2014-2016 / FZ 09 2014-2016 MT-03 / MT-25 2015 / MT-10 2015
  • XSR700 2015 / XSR900 2016 YBR125 / XJ6 / FZ8 / FAZER8 / XJR1200 / FZ400
  • XJ6N/S/F 2009-2010 / FZ6-N / MAJESTY250
付款前核對

可用付款方式和最終總額會在結帳頁顯示。

何時寄出

請同時考慮訂單處理和運送所需的時間。

Standard Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

Express Shipping: 訂單處理(工作天) 0–1; 運送(工作天) 7–15.

查看詳細說明
需要退款時

詢問退款時,請向店舖提供訂單編號。

退貨前請聯絡客服確認退款處理時限。

查看詳細說明
配送費用

請核對收貨地區與所選配送方式的費用。

Standard Shipping · 美國: US$0.00

Express Shipping · 美國: US$3.99

查看詳細說明
退貨前須知

寄回商品前,請先確認適用的退貨條件。

美國 · 退貨期限(簽收後天數): 30. 退貨方式: 郵寄退貨. 退貨運費: 賣家承擔.

查看詳細說明

Customer Reviews (4.8 / 5 · 5 reviews)

Richard X. ★★★★★

The CNC aluminum feels rock solid on my 7/8" bars, and the 3.5" glass gives a wide, clear view without vibrating. I've adjusted the ball socket a few times to find the perfect angle, and it holds tight on the highway.

Andrew ★★★★★

The ball socket swivels exactly where I need it, so adjusting the angle mid-ride takes seconds. Mirror glass is crystal clear with zero vibration at highway speeds, and the CNC aluminum feels rock solid. Took ten minutes to swap onto my 7/8" bars and they haven't budged since.

William E. ★★★★★

I was skeptical about CNC billet aluminum holding up, but these mirrors feel rock-solid on my bike. The 3.5-inch mirror surface gives a surprisingly wide view without vibrating at highway speeds.