Can-Am Maverick X3 Battery Jump Post Relocation Kit Installation

Quick answer

Install a battery jump post relocation kit on your Can-Am Maverick X3 to move the battery terminals from the rear compartment to under the hood, making jump starts and charging much easier.

Installation steps

1. Disconnect the factory battery: Remove the negative terminal first, then the positive terminal. This prevents accidental shorts while working. Always disconnect negative first to avoid sparks near the battery.
2. Route the relocation cables: Run the included positive and negative cables from the rear battery compartment to the under-hood area. Use zip ties to secure the cables along the frame, avoiding hot or moving parts. Ensure cables are not pinched or rubbing against sharp edges.
3. Mount the terminal posts: Attach the provided terminal posts to a clean, flat surface under the hood using the supplied hardware. Tighten securely but do not overtighten. A common mistake is mounting on uneven plastic—use a metal bracket if needed for stability.
4. Connect the cables to the terminal posts: Attach the positive cable to the positive post and the negative cable to the negative post. Torque to 8-10 ft-lbs as recommended. Double-check polarity—reversing connections can damage electronics.
5. Reconnect the factory battery: Reattach the factory battery terminals—positive first, then negative. Test the connection by turning on the ignition. If the vehicle doesn't start, check all connections and ensure the relocation cables are fully seated.

Product facts

• Universal Battery Jump Post Starter Terminal Relocation Kit for Can-Am Maverick X3, Polaris: The KEMIMOTO Battery Terminal Relocation Kit moves your battery terminals from the factory rear battery compartment to a convenient under-hood location. You can connect jumper cables or a battery charger without removing body panels, saving time and hassle in emergencies.