Install UTV Side Mirrors on 1.75-2 Inch Roll Bars
By Kemimoto Official: Aftermarket UTV Accessories & Parts | Published: 2026-10-25
Category: How-to Guides
Learn how to install universal UTV side mirrors on 1.75 to 2 inch round roll bars. Step-by-step guide for a secure, shake-free mirror mount.
Quick answer
Secure universal side mirrors to 1.75–2 inch round roll bars using the supplied clamps. Adjust the break-away hinge and tighten screws after installation to prevent mirror shake.
Why roll bar diameter matters
UTV roll bars come in two common diameters: 1.75 inches and 2 inches. Using the wrong clamp size leads to loose mirrors that vibrate or shift during rides. Universal mirror sets include adjustable clamps that fit both sizes, but you must confirm the clamp opens wide enough for your bar before tightening.
Break-away hinge adjustment
The break-away feature lets the mirror fold on impact instead of snapping. After installation, check the hinge tension. If the mirror flops freely, tighten the pivot screw. If it won't move at all, loosen it slightly. A properly adjusted hinge holds the mirror steady yet folds on a hard hit.
Installation steps
- Step 1: Position the mirror on the roll bar: Slide the clamp over the roll bar at your preferred height. Make sure the mirror arm points toward the rear of the UTV for a proper field of view. Common mistake: mounting the mirror too far forward reduces rear visibility.
- Step 2: Tighten the clamp screws evenly: Use a hex key or screwdriver to tighten the clamp screws a little at a time, alternating sides. Stop when the clamp grips the bar firmly without deforming it. Over-tightening can crack the clamp or dent a thin-wall roll bar.
- Step 3: Adjust the mirror angle and break-away hinge: Tilt the mirror head for a clear rear view. Then set the break-away hinge tension so the mirror stays put during rides but folds on impact. Tighten the pivot screw once the angle is correct. Check the hinge tension after the first ride – clamps and screws can settle.
Product facts
- Universal Side Rear View Mirrors and Center Mirror Fit 1.75“ - 2" Round Roll bars: Made of high impact aluminum, glass lens and durable clamps, the whole set of RZR side mirrors is worn and corrosion resistant, great for all weather conditions. The aluminum build and corrosion resistance mean the mirror set lasts through mud, rain, and sun without rusting or cracking.
Universal Side Rear View Mirrors and Center Mirror Fit 1.75“ - 2" Round Roll bars
